Ford vehicles use two strategies to attach the sway bar links. One type makes use of a bolt-on link, which features rubber molded into the ends of the links. The other methodology employs a tube and rubber cushions with an extended by way of bolt. Regardless of the method your vehicle uses, putting in a sway bar link requires nothing more than a pair of wrenches, and the flexibility to get underneath the vehicle.
Ford Sway Bar Link Installation Instructions
1. Compare the new links to the previous links. Pay shut attention to which is right or left, and which end is up.
2. Remove one of many previous links. This may require two wrenches. Use one wrench to carry the by bolt, and the other to remove the nut. On automobiles that use the cushion and tube design, it’s doable for all or part of the link to be missing. This is due to the bolt breaking from rust or stress, which releases pressure on the rubber cushions, allowing them to fall out.
3. Orient the new link within the proper direction and install the nuts on the bolts, again utilizing two wrenches. Tighten the nuts and bolts securely.
4. Assemble the parts of a by bolt sway bar link and install the bolt. Tighten the nut until all of the rubber cushions are evenly compressed to about 2/3 of their uncompressed thickness.
